I want to put the FE3 suspension on because it looks nicer and runs a little more to my liking. And over the same roads, the CTS took the pot holes and rough pavement much easier. Fasterproms Ported Intake Manifold w/LS3 TB. Suspension. Three suspension tuning levels are available: FE1 (standard), FE2 (standard on 3.6L models and optional on 3.0L models) and the FE3 sport suspension with a summer-only tire (RWD only). the car equipped with the base suspension, FE1, will have 17" rims. 2012-2013 Impala FE1, FE2 suspension Rack And Pinion . FE3- suspension system, sport. This sticker is always found on the inside of the glove box door. Fixed that a little bit for ya. What is the difference between FE1 and FE3? I have an early 2003 Ion and most of the control arms I see advertised seem to be for FE1 Suspension which my car does not have. JavaScript is disabled. This translates into a far more precise feel from the suspension and steering. I have FE3 (Z51 without Magride) and love it. The fe3 was only on the redline and the fe5 only on the Cobalt sstc. Discouraged by reviews of the FE3, and without the ability to sample it in advance, my father ordered his car with the FE2, billed as offering the best ride-handling balance. I am just trying to figure out what the difference is between the ones for 80 dollars and the ones for 140 dollars. Inside and Out. Mainly the difference between the FE3 and FE2 is that FE2 has smaller stabilizer bars, softer springs, softer bushings everywhere, less aggressive dampers, strut/suspension braces deleted and more steering ratio (takes more turning to go lock to lock). Aurora Projects/Builds. The FE1 with the heavier sway bars gives a soft but stable ride, and I'm happy that way. the car equipped with the base suspension, FE1, will have 17" rims. The annual repair and maintenance cost for this model is approximately $540. I went onto A1 auto and was looking at suspension for my 2007 Chevy cobalt LS FE1 model suspension. Developed for racing, the Corvette Track Suspension Kit has been tuned with all-new stabilizer bars, lower control arms with stiffer handling bushings, and track-optimized passive shocks. Fleetwood: 4475. What is the difference between FE1 and FE3 suspension? SOLVED: I have a 2009 HHR LT wagon 2.4 FE3 Suspension with - Fixya Yea . I know this has been asked before so don't bash me guys, but how can I tell what suspension I have ? The upper ball joint is . If you continue to use this site we will assume that you are happy with it. Difference between FE1 and FE3? On a "base" suspension car, you will only find the code FE1. FE2 Suspension question | Aurora Club of North America (ACNA) Forum ALL MODELS EXCEPT VEHICLES WITH FE3 SUSPENSION. FE1 is the Corvette Standard Suspension and FE3 is the Corvette Sport Suspension. There are two sub-levels of shocks available on the FE1. The lower control arms on the FE1 suspension are steel, while on the FE3 suspension, they are aluminum, but they are dimensionally the same. In general, the SKY is slightly heavier due to option content, differences in structural mass, etc. Front Suspension The front suspension on the Cadillac CTS is a double wishbone style. This kit is homologated for SCCA's Touring 1 Class and is designed to maintain . You have a placard in your trunk that tells you what you have, it lasts all your option codes. Suspension choices for the base model C5 were limited to the standard suspension (RPO FE1), with options for either the autocross-inspired FE3 Sport Suspension (included with the Z51 Performance & Handling Package and standard on the 1999-2000 FRC); or the F45 Selective Ride Control Suspension, which permitted "on-the-fly" driver selection of . 22mm Seams to be about the perfect size to get nice turn in.
difference between fe1 and fe3 suspension